Maxnomic 扶手椅靠枕替换

Maxnomic armrest cushion replacement

2024-05-04 23:22:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

As the PU foam of my armrest was crumbling I designed some new armrests similar to the old design.

I tested the design in 2 versions. One in TPU 95(Sainsmart) and one in TPU 85A (Ninjatek Ninjaflex).

I prefer Ninjaflex TPU for this design (use 15% gyroid infill) as I like the feeling and the cushioning of that one the most. If you want to print using TPU95 I got the best results when changing the infill from gyroid to aligned rectilinear 15%.

I had a couple of failures with Ninjaflex on my X1C and tried some rear mounted bearing based spool holder but in the end it was due to the filament being too tightly wound around the spool. I (manually) rewound the spool and everything went fine.

I've been using them for a couple of weeks now and they are holding up nice.