XL4015 DC模块外壳（DC-022B插座输入）

XL4015 DC module case (DC-022B jack input)

2024-05-05 01:05:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

XL4015 DC-DC step-down (CC&CV) converter module case with DC-022B jack as input. Version without jackis here.

DC-022B (or, sometimes, 0022B) is 5.5x2.5/5.5x2.1/3.5x1.35, panel mount jack. You need to flatten the jack pins, preferably symmetrically in the center, so that they fit into the DC module.

Top part has several holes options - standart, led-only and blank - you can see them in the image. Bottom part also has standart and blank options.

The module has a horizontal coil. Since the layout of the module components varies depending on the manufacturer, see the image for approximate dimensions.

Used models:DC-022Band modifiedXL4015 module.

Print Settings

Printer:
Custom RAMPS1.4 FDM
Supports:
Doesn't Matter
Resolution:
Nozzle 0.3 - extrusion width 0.36, layer height 0.15
Filament brand:
NoName
Filament material:
PETG
Notes:
I used inside-out outline direction. If you use the same settings, print the bottom model with "gap0.4" suffix. It has a 0.2mm gap with the top part on each side, which will be "compensated" by the slicer and sagging. Use model w/o gap if you have a precise printer - in it, the sizes of the interlocking parts are equal.