穿越沙海：全享版+集市扩展组件

Through the Desert (Allplay edition) + Bazaar Expansions Insert

2024-05-05 01:20:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an insert designed to fit the Allplay 2024 edition of the gameThrough the Desertplus all the pieces from theBazaarexpansion. As you likely know, this is a very full box, and as such this insert does NOT supports sleeved cards, but in exchange it holds everything with less than 1mm of lid lift. (It probably won't hold the optional wooden camels, and definitely won't hold both plastic and wooden camels)

I printed these with 15% gyroid infill, but you can use 10% infill if you increase the number of top shell layers by one (or if you don't care about slight imperfections in the bottoms of the boxes). PLA+ works great for all of these.

You will need to print one of most of the models, with the following exceptions:

print three each ofcamel_box_tall.stlmodels, color-matched to three camel colors if desired.
print two each ofcamel_box_short.stlmodels, color-matched to the remaining two camel colors if desired.

Notes:

The oasis tokens store better if you take their tops off and store the bases horizontally.
The drawstring bag from the expansion rolls up and fits in with the oasis tokens.
Therider_box.stland twocamel_box_short.stlpieces stack on up of thecards_holder.stlpiece.
I recommend storing the game board on top of the other pieces to help keep the pieces from moving around. The lid of the box can do this, too, of course, but the extra weight of the game board seems to be more effective.