3dsjs

Tenways CGO800S 传送带保护装置

Tenways CGO800S belt protection

2024-05-05 02:03:36

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

I designed this belt protection especially to prevent wide pants to be stuck in the belt.
Fits on a tenways CGO800S, no idea if it is convinient for others.

I designed it to be supportless.

Better printed in PETG to be a bit more flexible and handle summer sun and temperature without melting.

Print Settings

  • Printer brand:

    Artillery

  • Printer:

    Artillery Sidewinder X1

  • Rafts:
    Doesn't Matter
  • Supports:
    No
  • Resolution:
    0.2
  • Filament brand:

    arianeplast

  • Filament material:

    PETG

Post-Printing

the 2 parts are to be glued.
use an M4 screw & nut to assemble on the bike

License

CC BY-NC-SA

Tenways CGO800S belt protection
byAntoineBiis licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.

Tenways CGO800S 传送带保护装置
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15