16×32 RGB矩阵Arduino控制箱
16X32 RGB Matrix Arduino Enclosure
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is an enclosure for the popular 16X32 RGB matrix sold by Adafruit, Electronic Goldmine, and others that has a mount for an Arduino Uno built in. I've included the hole for the Arduino's USB port, but not the other holes for switches shown in the photo. You can add holes to the STL file as needed or drill them after printing. This enclosure also has an attached loop for hanging the display in a window. 3mm X 25mm screws are needed to attach the enclosure to the RGB Matrix, and small self-tapping screws are needed to attach the Arduino to the enclosure.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 5
- Rafts:No
- Supports:Yes
- Resolution:0.15mm
- Infill:20%
- Filament brand:
3D Fuel
- Filament color:
Any
- Filament material:
Pro PLA
- Notes:
Suggest 4 top and 4 bottom layers and at least 3 perimeter layers. If using ABS or ASA scale up 1 or 2 % to account for shrinkage. If you have trouble with the corners lifting off the print bed, add some 0.5mm "feet" to the corners on the STL file or use a raft.
Post-Printing
You may need to file out the USB port opening a bit - it's very tight.
Tags
License
16X32 RGB Matrix Arduino Enclosure
byEVDriverScottis licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.
相关内容
猜你喜欢
联系我们
热门推荐
-
披萨面积估算模型2023-06-20 -
参数化Whynter AC排气管道接头3D模型2024-01-04 -
Autech块版本2024-02-04 -
3D模型：肩部按钮模块V0.1B2024-03-25 -
雷霆路：复仇基地全地形模型2024-03-31
最热下载
-
Delta设置校准为Klipper2023-04-23 -
猫咪零食球2024-03-29 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
厨房水槽滤网过滤器2025-06-05 -
原神优菈2025-06-27
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
弹弓HGX-FRAME V1A2025-07-18 -
巴黎卢浮宫的三圣母像2025-07-16 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
关节活动人，假人13,Dummy 132025-07-02