联想ThinkPad X1 第二代底座模块固定销

Lenovo Thinkpad X1 Gen 2 Base Module Locking Pin

2024-05-05 05:38:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

联想ThinkPad X1 第二代底座模块固定销

联想ThinkPad X1 第二代底座模块固定销

Summary

This is for the locking pin that is inside the Base Module (part 22https://support.lenovo.com/us/en/solutions/pd104113-system-service-parts-thinkpad-x1-tablet-machine-types-20gg-20gh-20jb-20jc, which is this specific part 01AW792:https://support.lenovo.com/us/en/accessories/acc500020-thinkpad-x1-tablet-base-module-gen-2) for a Lenovo ThinkPad X1 Tablet 2nd gen.

The base module is what the keyboard partically magnets to, and there is the ability to remove the base module by sliding a switch which lowers a locking pin (which is what keeps the base module from sliding off the tablet). Of about 25 of these tablets I bought, about 6 of them had a very loose base module and it turns out they're all due to this tab being broken. So I created one by measuring the old one, and guessed at how long the pin should be. Works great!

Note, yes, it is a very small part, and you'll need to print with supports.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1P
Rafts:
No
Supports:
Yes
Resolution:
.16
Infill:
20
Notes:
Just make sure you print with supports (I printed with the flat side of the peg on the bed), and probably a bit of a raft or skirt, depending how well small prints adhere to your bed

Tags

Lenovo locking pin x1 tablet

License

CC BY-NC

Lenovo Thinkpad X1 Gen 2 Base Module Locking Pin
byjrinco11is licensed under theCreative Commons - Attribution - Non-Commerciallicense.

联想ThinkPad X1 第二代底座模块固定销

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

紧急哨声器小型超响
2025-06-18
星球大战3D棋盘模型：MrBaddeleys国际象棋棋子50%比例展示
2023-08-24
迷你足球台球桌
2024-03-15
轻巧 AAA 电池容器
2024-03-27
Cateye自行车后视镜修复
2024-04-21

最热下载

最新模型