FDM打印 SLA 印刷机（TOS品牌）

FDM printed SLA-Printer by TOS

2023-03-26 21:04:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This text describes the components and parts included in a project, likely a DIY electronics kit or build. Here's a breakdown of what it contains: **1. Main Board Components:** * **Raspberry Pi Model 3:** The central processing unit of the project. * **5.5-inch LCD Display:** High-resolution display with 2560x1440 resolution. * **HDMI-MIPI Driver PCB:** Allows connection between the Raspberry Pi and the display. * **Display Protection Film:** Protects the LCD screen from scratches. * **DC Converter:** Regulates voltage for various components. * **FEP Film:** A flexible polymer film used for insulation or protection. * **Miniature Switches:** Allow for on/off control or other actions. * **External Power Supply:** Provides power to the system (12V, 5A). * **Stepper Motor:** Allows for precise movement within the project. * **HDMI Cable:** Connects the Raspberry Pi to the display. **2. UV Lightbox Components:** * **UV LEDs:** Four 10-watt LEDs emitting ultraviolet light at 405nm wavelength. * **Aluminum Heatsink:** Dissipates heat from the LEDs. * **Fan:** Cools the heatsink and LEDs to prevent overheating. * **Hot Melt Adhesive:** Used for attaching components to the heatsink. **3. Display Options (A-type or B-type):** * **A-type:** 1602 LCD module with I2C interface, LED indicator, tactile switches, and a matrix board. * **B-type:** 3.2-inch enhanced Nextion display. **4. nanoDLP-shield Components:** * **Voltage Regulator PCB:** Regulates voltage levels for the shield. * **Stepper Motor Driver:** Controls the stepper motor connected to the DLP projector. * **Mosfet:** A semiconductor device used for switching and controlling current. * **Resistors and Capacitors:** Passive electronic components used in various circuits. * **Connectors:** Different types of connectors allow for wiring and component connections. * **Screw Terminals:** Provide secure connections for wires. **5. Mechanical Components (for DLP-shield):** * **Round Power Switch:** Allows turning the power on/off. * **Barrel Connector:** Provides a power connection to the system. * **M3 Screws:** Used for fastening components together. * **Linear Bearings:** Enable smooth linear motion. * **Aluminum Tubes and Strips:** Used for structural support and housing. * **Lead Screw and Nut:** Create precise linear movement. **Conclusion:** This project appears to be a complex DIY electronics build that may involve 3D printing, electronics assembly, programming, and potentially optics. The text provides a detailed inventory of the components needed but lacks specific instructions or assembly details.FDM打印 SLA 印刷机（TOS品牌）

朋友，你觉得上面这个模型，属于下面的哪个分类？