VHS视频盒小型存储盒

VHS video cassette small parts box for fishing lures and other stuff

2024-05-05 20:13:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Reuse the cases from your old VHS video cassette to store small parts like fishing lures etc.

There's three variants, marked by an acronym in the file name:

no bottom (nb): prints fastest, but small parts like fishing hooks tend to creep under the walls if they are not glued to the case
with bottom (wb): better suited for small parts
pocket bottom (pb) with raised bottom: more shallow compartments with two pockets under the bottom accessible from the back side for flat stuff like zipper bags etc.

The other parts of the file name give you an indication of the number of compartments and their sizes in mm, "v" is for a vertical, "h" for a horizontal compartment.

Printing is straightforwards, except for the "pb" variant. The raised bottom needs (a lot of) support. Alternatively, if you know how to make your printerbridge properly, print the "ws" version without support and remove the thin backside parts under the bottom which were added to enable bridging.

There's all kinds of different cases for VHS cassettes, so make sure that you get the type you can in my images.

In most cases you'll have to remove two raised parts and also the small side flanges with a sharp knife to make things fit (see images).