VW MK1 集群边缘连接器

VW MK1 Cluster Edge Connectors

2024-05-05 23:36:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Cluster edge connectors for 14 and 12 pin clusters.

14 Pin
Also known as a binder, this connector sits on the back of the dash cluster.
It holds the cluster foil in place and is used to connect the cluster foil to the car wiring via an edge connector.

As the OEM version design tabs break-off easily, this has been redesigned to connect using the two screws adjacent to the the tab inserts.

Part # 321919060, 321-919-060
Note: This connector is designed to work with the Scirocco, Rabbit, Golf, Polo MK1 and will work with the VDO and MotoMeter 14 pin cluster connectors.

Want is professionally printed, use Shapeways:https://www.shapeways.com/product/2KNUPVEJN/cluster-foil-binder-connector-14-pin-vw-mk1?optionId=169894894&li=shops

12 Pin
Also known as a binder, this connector sits on the back of the dash cluster.
It holds the cluster foil in place and is used to connect the cluster foil to the car wiring via an edge connector.

As the OEM version design tabs break-off easily, this has been redesigned to connect using the two screws adjacent to the the tab inserts.

Part # 171919060A, 171-919-060 A
Note: This connector is designed to work with the Scirocco, Rabbit, Golf, Polo MK1 and will work with the VDO and MotoMeter 12 pin cluster connectors.

Want it professionally printed, use Shapeways:https://www.shapeways.com/product/CJ5QDYZJF/cluster-foil-binder-connector-12-pin-vw-mk1?optionId=297450525&li=shops