Turtle Beach Velocity One 飞行模拟器触发臂

Turtle Beach Velocity One Flight Deck Trigger arm

2024-05-05 23:50:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement arm for the VelocityOne Flight Deck Secondary trigger.
The trigger has two parts an analogue movement and a button trigger at the end of the movement. This is the lever that does both these actions inside the joystick.
This is a work in progress. So far the trigger works fine, the movement of the analogue part needs a bit more fin

Do whatever you want with it, I don't care.

Incidentally, TurtleBeach sent me a new stick to replace the old one without requiring me to send the old one back, so I attempted to fix the old one with this.

If you have any improvements, please feel free to change/remix.

In the picture, the printed one is on the left, the broken original is on the right. On the original, the arm is glued back on (but keeps breaking off again) but the projection for the analog part is snapped off.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
Yes
Supports:
Yes
Resolution:
0.08mm
Infill:
100%
Filament brand:
Ancient ABS I found in the drawer!
Filament color:
Black
Filament material:
ABS
Notes:
Printed 100% infill in ABS with supports. Printed screw hole side down with the arm floating. The most delicate part is the little slotted projection that fits inside the pot for the analogue trigger. This is best printed well away from any supports. Turned off "support for bridges" as this kept the hole clear for the screw.
One layer raft as it tended to come unstuck without this.