3dsjs

便携式箭羽夹具V2

Pocket Fletching Jig V2

2024-05-06 00:21:30

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This is a pocket fletching jig designed to precisely align standard 2" vanes and have been tested with Bohning Blazer Vanes and NAP Quickspin Vanes – Bone Collector Edition. Use your preferred 2" vanes and adhesive. This is a newer version of my original Pocket Fetching Jig, but this version is designed to print the body in one piece and offsets the vanes 2.5 deg. The support setup is critical to getting a usable finished product. When slicing with cura, I have the overhang angle set to 88 and I have a support blocker where the arrow would be. For Anycubic slicer, I have the overhang threshold set to 10, with a support blocker where the arrow would be. Print 1 body and 3 arms.

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender 3

  • Rafts:
    Doesn't Matter
  • Resolution:
    .2mm
  • Infill:
    40
  • Filament brand:

    Hatchbox

  • Filament material:

    PLA

Post-Printing

Remove supports and sand any imperfections.

How I Designed This

Designed in Fusion 360.

Tags

便携式箭羽夹具V2
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15