Cetus X顶棚适用于Hawkeye 4K摄像机

Cetus X Canopy for Hawkeye 4K camera

2024-05-06 00:35:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Cetus X Canopy for Hawkeye 4K Cam.

These parts are for the Hawkeye 4K Thumb 3D/Giroflow Camera first generation. It will not fit the generation 2 model. For FPV the first generation is better from a few review I have read.

The Cetus X canopy parts are a based on the Canopy V6 design by eezieezi herehttps://www.thingiverse.com/thing:5881421

WARNING : I have not tested in flight these parts since as I am writing this, I am still waiting for my Cetus to arrived. So I don’t know what will be the best combination get jello free video.

A - Canopy with camera mount in one piece. The bolt is a 3 mm by 18mm. The hole in the mount is 3.5 mm.

B - Canopy with the base to hold part C with two tie-wraps. The rectangular holes for the tie-wraps are 3 mm X 1.5 mm.

C - The TPU camera holder with two holes for tie-wraps.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
100 %
Filament brand:
Your Choice
Filament color:
Your choice
Filament material:
PLA and TPU
Notes:
WARNING : I have not tested in flight these parts since as I am writing this, I am still waiting for my Cetus to arrived. So I don’t know what will be the best combination get jello free video.