奶茶杯转灯罩适配器

Bubble Tea Cup to Lamp Shade Adapter

2024-05-05 17:34:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

明日方舟&奈雪的茶联动杯灯罩转接器
适用于外径不大于28mm的LED灯泡（非LED灯泡可能有过热问题）
需要先取下灯泡，套上转接器，装上灯泡，再把杯子卡上去
两侧有下压把手可以松开卡扣
可能需要根据实际情况在杯子里添加柔光用的纸

adapter for Arknights-CN&Naixue collab products
suitable for LED bulbs with a outer diameter of less than 28mm (might cause overheat if not used with LED bulbs)
to install, you'll have to detach the bulb first, attach the adapter then put the bulb back, and finally push the cup in
I also put handles on each side to allow easy detachment
you may also find it useful to put extra papers in the cup, in order to get softer lighting

Print Settings

Printer brand:
VoronDesign
Printer:
Voron 0
Supports:
Doesn't Matter
Notes:
might need extra support depending on your print settings, I printed PETG at 250 without support and it worked just fine