魔术子弹搅拌机 (MBR-1101) - 电机安装底座齿轮更换

Magic Bullet Blender (MBR-1101) - Motor mounted base gear replacement

2024-05-08 09:41:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement part for the Magic Bullet Blender Model MBR-1101. It may work for other similar models, but I'm not 100% sure about that. This is the part that is friction fit onto the motor shaft and is the connecting part that transfers the force of the motor to the rubber piece on the vessel's blade lid cover to spin the blades. I believe it is called the "base gear" from what I found on Amazon.

Strong Enough?

I just used basic PLA with 100% infill on my Ender 3 and have been running it for months without it coming apart, slipping, or having any issues whatsoever.

NOTE*:The hole to friction fit the motor shaft into is slightly undersized on this part, so you may need to sand to drill it slightly to fit the correct way and be snug. Or you could do what I did and heat the material of the hole on the printed part, getting it malleable, and then be able to friction fit it on. If not, nothing a dremel or drill can fix to adjust the hole size to be a little larger to fit correctly.