手指锯

Fingersaw

2024-05-08 10:08:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

One day I said to myself, "I want a 3d-printed fidget saw" and had also wanted to try making a print in place object. And that's how this was born. Version 1 was terrible and is not published here. Version 2 is bigger, and has thinner blades, so it is sharper. Version 3 is smaller and faster to print, as well as having thicker blades.

It could be interesting to make a handle with some sort of spring attached to a rubber band to make it spin faster, but I do not want to get ahead of myself.
I also made a gear version HERE->https://www.thingiverse.com/thing:6612993

Post-Printing

This can take a bit of work to get spinning. I have had success with vice clamping between two quarters, or putting one side of a pair of pliers on the inside of the ring and squeezing the two pieces together from multiple angles. After spinning it for a bit, you can add some lubricant to make it work better.

It may not overhang correctly and need some filament cut out with a knife in order to work.

It may also work better on printers better than mine.