PCB工作站带有纳米探针

PCB Workstation with Nano-Probes

2023-03-26 21:11:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

The new PCB Workstation with Nano Probes

PCB Workstation reviewed on SuperHouseTV YouTube channel

new 2023 model now available on ingegnotech.company.site

.
nAs an exclusive feature, this tool uses acupuncture needles as test probes. Thanks to their excellent physical and mechanical properties, these thin needles allow the best electrical connection between tiny SMD electronic components and electronic laboratory instruments, such as oscilloscopes, logic states analyzers, ICs programmers and memory chip readers.

This tool also introduces a new base frame, having 8 slots for the PCB holders. In this way, the base allows accommodating PCBs even of irregular shape without problems. Moreover, it is more rigid and more stable allowing to work in the best conditions.

In addition to the double-sided PCB Holders, the new Flat PCB Holders are now also available, allowing an even larger electronic device to be held firmly in place on the base frame. The flat face must be covered with an adhesive soft rubber pad. The assembly of the PCB holders to the base requires wing nuts (5mm) and hex bolts (5×12mm).

The articulated crane arms have been completely redesigned. The base element has now a reinforced pivot through a screw to be screwed into the internal hole (use a self-tapping flat countersunk head screw 2.6x10mm). Moreover, the base element is provided with a handle to easily rotate the crane arm around its vertical axis. The vertical element has a lower height, thus allowing to put the whole PCB Workstation under a microscope to magnify the PCB working area. The horizontal element is provided with a special flexible holder for acupuncture needles that can be easily removed and replaced; moreover, it is provided with 4 cable holders instead of 2 to better accommodate the wire soldered to the needle. The assembly of the crane arms requires M4 wing nuts (4mm), hex bolts (4×10 mm) and flat washers.

PCB工作站带有纳米探针

朋友，你觉得上面这个模型，属于下面的哪个分类？