安钦卡Mega S / I3 Mega静音电源保护罩

Anycubic Mega S / I3 Mega quiet Powersupply Netzteil PSU Cover Abdeckung | 92mm or 60mm

2023-03-26 21:17:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This text describes a process of installing a Noctua NF-A9x14 PWM fan in a 3D printer, likely as an upgrade to the existing cooling system. Here's a breakdown:

Wiring: The original 3-pin connector on the fan may not fit directly into the motherboard's 2-pin connection. A 3-to-2-pin adapter is used for this purpose. If even that doesn't work, you can cut and solder the existing fan cable or use a cable from an old fan.

Low Noise Adapter: The text highly recommends using the "Low Noise Adapter" that comes with the Noctua fan to further reduce noise levels.

Additional Cooling: A custom-printed Fan Duct is mentioned, possibly designed to improve airflow and cooling efficiency.

Specific Fan Model: The author installed a Noctua NF-A9x14 PWM fan, known for its quiet operation and performance. They also mention using a Noctua 40x10mm fan in another part of the printer.

Key takeaways: