菠萝气泡器
Pineapple Bubbler
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanExperience the unparalleled luxury of inhaling the cool smooth vapors of your finest herbs from a beautifully robot-crafted water pipe. Shaped like everyone's favorite fruit, this pipe is like nothing else that has ever been created by humankind, before or since.
The Pineapple Bubbler can be configured in a number of different ways, from a small, discreet piece to a big, long party pipe. The modular pieces can be printed in different colors, creating a smorgasbord of possibilities.
I must point out that this is to be used with a glass bowl that you must provide. You obviously cannot smoke directly out of plastic or it would melt and create toxic fumes. I recommend printing the parts from one of the various food-grade 3D printing filaments now available.
Supplies:
There are just a few things you will need to assemble your bubbler:
- 1 #89 O-ring - https://www.amazon.com/Danco-O-Ring-Nitrile-Butadiene-Polybag/dp/B000RY9E3I/ref=sr_1_2?s=hi<br/>
- 1 #89 O-ring - 1 Pineapple Stem
- This will require around 60 grams of plastic, and although it may not look like it will need it, use supports. It needs support for the underside of the lip, not for the leaves. It won't take much, but it will allow it to seat the o-ring so that it gets a really good seal with the bulb.
- Once the bulb and the stem are printed, the pineapple is useable, while you wait for the other parts to print. You just need a standard glass 14mm bowl. Cover the carb with your finger for now.
- The Bowl may be loose. This is by design, to allow for variations in the diameter. Wrap it with a few layers of tape to get a good seal and provide insulation in case the bowl ever gets too warm.
1 Mouthpiece
- Print one to go on the end of the stem.
- Optional Curved Mouthpiece - use this in place of the regular mouthpiece for more ergonomic pipes. Creates extra length so no stem extensions are required.
1 Carb Plug
- A plug for the carb, featuring the Everyday Pineapple logo.
1-? Stem Extensions
- Stem extensions add length to the stem, making it more ergonomic. You can use none at all, for a more compact device, or as many as you like, as long as you've got a friend who can reach the other end to light it.
- We've also provided a twisty stem piece, one surrounded by the Everyday Pineapple logo, and one surrounded by a leaf emblem that can be mixed and matched, or easily customized however you want.
0-2 Ash Catcher / Pre-Cooler
- This part is totally optional. It gives you an extra level of pre-filtration through water before the air enters the main chamber. It looks really cool, and can potentially be daisy chained two or three times if you wanna get really crazy.
- We recommend waterproofing this one as well.
Early Adopters
Be one of the first to try out the Pineapple! We are confident that this is already the best 3D printed water pipe that has ever existed, but we welcome all feedback. What do you like about the Pineapple? What could be better? How much would you pay for one of these? What about if it was customized with your name or logo? What added features would you like to see?
Whatever you you do, please post pictures of your prints. It makes me the happiest pineapple in the world.
菠萝气泡器
相关内容
猜你喜欢
联系我们
热门推荐
-
PI 5型号外壳搭配Pimoroni NVE接口和Waveshare POE帽2024-02-06
-
AR触发钩2024-03-25
-
吸血鬼领主(免费D&D小模型)2025-07-15
-
杂志/书籍/纸张 支架2024-04-29
-
泡泡底拖鞋2025-07-17
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26
-
ZTE MU5001 上位电容器2024-01-10
-
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23
-
21700毫安电池单元保持架2024-04-06
-
比基尼模型2025-07-16
最新模型
-
关节活动人,假人13,Dummy 132025-07-02
-
线框无心2024-05-08
-
SFF8470连接器2024-05-08
-
Amphenol MC3M 适用于经典版舒尔话筒2024-05-08
-
特斯拉P40风扇适配器2024-05-06