Ryobi R18TR 路由器与进化型轨道系统的适配器

Ryobi R18TR Router to Evolution Track Adapter

2023-03-26 12:17:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

我正在寻找一个适配器，以便能够使用Evolution轨道与我的Ryobi One R18TR剪头路由器搭配使用，但没有找到合适的适配器，因此我根据Dawoodster66创建的一个模板，基于这个设计创建了一个适配器：

https://www.thingiverse.com/thing:5389665

适配器板通过原有的螺丝安装在路由器的底部，但需要先移除路由器提供的清晰塑料脚。

为了方便使用，我在侧面浮出轨道到路由器中心的距离（60毫米），以及旋转方向的箭头。

I have included technical drawings showing the router mounting hole spacings and other mounting parameters, plus a technical drawing of the track this is designed to fit to allow you to check if this will fit your own router / track. I believe the evolution track has the same dimensions as several others, and the routers have a number of common configurations.

I have designed the part to print without supports if printed on its side in the orientation provided in the STL. I ended up using rafts as I was getting a little warping due to the small contact area with the build plate when printing on its side, however you may be able to print without, you can see the surface on the raft is not as smooth as other sides so if you can avoid it I recommend doing so.

I have printed and mounted this and tested it smoothly fits the both the rail and router, however I have not yet started the project I designed it for so I haven't completed testing yet.

Ryobi R18TR 路由器与进化型轨道系统的适配器

朋友，你觉得上面这个模型，属于下面的哪个分类？