安纬A8触摸式3D支架

Anet A8 3D-Touch Mount

2023-03-26 22:36:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This text describes how to calibrate a 3D printer, specifically the Anet A8 with a BL Touch auto bed leveling sensor. It goes through several steps, including: **1. Initial Setup:** * Explains how the BL Touch sensor works, detecting the bed surface by probing twice and adjusting its height accordingly. * Suggests checking the cable and settings if the probe doesn't function correctly. **2. Z Offset Calibration:** * Provides a step-by-step guide on how to adjust the Z offset using Marlin firmware commands. * This involves resetting all Z offsets, homing the printer, moving the nozzle to the center, disabling software endstops, manually probing the bed surface, and registering the Z offset value. * Includes helpful tips like using `G30` to verify sensor functionality and the `z_min_probe_repeatability_test` feature for accuracy. **3. Troubleshooting:** * Addresses a common issue where the BL Touch might malfunction after powering on, suggesting a specific sequence of commands (`M280`) to reset it. * Offers additional links for further information, including resources for Marlin firmware configuration, BL Touch documentation, and SkyNet3D's Anet A8 Marlin port source code. **4. Additional Design Considerations:** * Mentions a new design called "Distant" for the Mistral 2 cooling fan and provides specific modifications to the Marlin firmware (`#define X_PROBE_OFFSET_FROM_EXTRUDER`, `#define RIGHT_PROBE_BED_POSITION`) needed for this setup. Overall, this text is a comprehensive guide on calibrating a BL Touch sensor on an Anet A8 3D printer. It covers basic concepts, step-by-step instructions, troubleshooting tips, and even links to external resources for further learning.安纬A8触摸式3D支架

朋友，你觉得上面这个模型，属于下面的哪个分类？