Zooz ZSE44 史蒂文森屏风户外支架
Zooz ZSE44 Stevenson Screen Outdoor Bracket
2023-03-26 12:37:49
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
This is an outdoor bracket for a ZooZ ZSE44 Z-Wave Temp/Humidity Sensor
nIt keeps rain, snow, and wind from affecting temperature & humidity readings.
https://www.thingiverse.com/thing:5810438
- Thicker side walls to add rigidity
- Thicker backplate as the original cracked
- Widened screw holes and added a taper to screw can sit flush without adding extra pressure on the bracket causing breakage
- Modified original middle section to add a holder that grips the sensor tightly thus not requiring the outdoor mount
I highly recommend printing this out in PETG.
At a minimum, you need to print the following pieces:
nTop x1
nMiddle x2
nMiddle Sensor Bracketx2
nWall Bracket Bracket x1
nTo assemble, place in the following order:
I printed out an extra middle section as I'm using 3 1/2" wood screws I had laying around and screwed the layers together.
NOTE: I used Prusa Slicer to add a shape and add a negative volume. If someone knows how to do this in a "proper" program, feel free to remix.
Zooz ZSE44 史蒂文森屏风户外支架朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Raspberry Pi Zero 外壳2023-05-27 -
金属加工滚筒货架托盘2024-03-27 -
兰博基尼全新品牌标识2024-04-01 -
丁卡标志来自GTA在线2024-04-17 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最热下载
-
1:10比例Chevrolet Camaro RC车身（测试部分）2023-09-06 -
21700毫安电池单元保持架2024-04-06 -
P90 AEG型号空气枪到Odin Airsoft速率加载器适配器2024-05-01 -
F1赛船3D模型固定文件2024-05-08
最新模型
-
Lego Grogu Carrier for IG-112024-05-08 -
3D 模型：胶水棒2024-05-08 -
Nemesis侧边替换打印2024-05-08 -
Reolink Duo 2/3电池适配器2024-05-08 -
Scirocco MK2 后排座椅夹2024-05-06