Enders 3 Max Neo型打印机LED灯具安装支架
Ender 3 Max Neo LED Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
LED支架适用于Ender 3 Max Neo等Neo/V2型号打印机。
I wanted an LED mount that would light the print as the Z axis raised. I tried a couple different mounts and this one worked best for me. One of my designed the LEDs were closer to the nozzle, but caused a lot of reflection off the glass bed. So this design moves the LEDs about 180mm from the nozzle.
It is recommended to print the LED "cover" in white PLA. Although the LEDs can get warm I have not had an issue with the PLA deforming.
This design uses 9 LED's. I use a Athom WLED High Power Addressable LED Strip https://www.athom.tech/blank-1/wled-high-power-led-strip-controllerController. I run the wires for the LED's in a 10mm plastic wire tube. https://www.amazon.com/dp/B07RXZM32S. Cable tied alongside the X axis wires.
There are 2 ways to print the arms.
nIf you run the wires the way I do in a 10mm wire tube then you can print 1 "left arm" and 1 "right arm clip"
If you choose not to use the clip then you can print 2 "left arm"'s
Fusion 360 Archive and STEP files included for you to make any modifications.
Enders 3 Max Neo型打印机LED灯具安装支架相关内容
联系我们
热门推荐
-
3D打印破碎机（Gearbox）2023-03-26 -
Bukobot 飞行器 - 单件可打印飞行模型2023-03-26 -
摇杆开关固定架 - 丰田RAV4 1994-2000 (XA10)2024-01-09 -
2024 FRC 注牌耳环2024-03-30 -
3D无手模型2024-04-19
最热下载
-
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
Philips 马拉松 FC9225 轮子 飞利浦 Marathon FC9225 轮子2024-03-31 -
21700毫安电池单元保持架2024-04-06 -
F1赛船3D模型固定文件2024-05-08 -
育苗盆-连续自动浇水系统（符合欧盟标准的密封水瓶）2025-07-25
最新模型
-
10ml注射器活塞2024-05-08 -
新邻居你好！2024-05-08 -
泡泡魔杖瓶架2024-05-06 -
沃尔沃V50雨刷导管2024-05-06 -
CIS 编织线火花线插头固定装置2024-05-06