威泽摄像头V3外壳

Wyze Cam V3 Cover

2023-05-10 07:31:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the Wyze Cam V3 slip-on cover by Fordmender. I really like the design, but I had an issue where the print did not fully cover the white bezel housing the lens. As such, I slightly redesigned it. Some differences between the remix and the original:

1) White bezel not showing
2) Snug fit
3) Faster print time (<1.5 hours with standard print speeds)

I made two versions: Wyze Cam V3 Cover and Wyze Cam V3 Cover (Tall).
The first version is for when the camera base is extended whereas the tall version is for when the camera base is not extended (examples in photos).

Make sure to print with the top of the cover (the top is where the camera will touch) touching the bed (after importing the .stl, rotate the part about the x-axis by -90 degrees). You may use supports on this print if you find that your printer does not bridge well.