Robomow RS系列泥轮

Robomow RS series mud wheel

2023-05-10 07:31:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The perfect extension for your RS series mower. Mud wheel is a good solve for a wet lawn at early morning and late evening.

Please note that there are two models in the project - lateral (installed from the sides of the wheel) and central (installed between the side pads). To equip one wheel, you need to print one center and two side pads.

I highly recommend these settings of printing:

filament - ABS or PETG

infill - 25%

solid infill threshold area - 25 mm2

perimeters - 3

layer - 0.2 ~ 0.3 mm

Attach to the wheel with three self-tapping screws 7-10 mm.

Category: Replacement Parts

Print Settings

Printer brand:
VoronDesign
Printer:
Voron2 350
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25
Filament brand:
e-sun
Filament material:
ABS

Tags

Robomow Robomow RS rs615 rs625 wheel

License

CC BY

Robomow RS series mud wheel
by rashn is licensed under the Creative Commons - Attribution license.

Robomow RS系列泥轮

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Kumonga的孩子与澳大利亚蜘蛛驯兽队
2024-03-17
Wolf系列手机支架
2025-07-16
quest 3 gun stock easy for print with Sholder support (based on fkiliver)
2024-04-05
罗宾：不公正2
2024-04-07
JeNo 3" Cage DJI O3 + Bras + Lipo Protection + Bumper 40°
2024-04-19

最新模型