Picoscope- DIY SmartPhone Oscilloscope using Raspberry Pi Pico

2023-05-10 16:44:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Picoscope- DIY SmartPhone Oscilloscope using Raspberry Pi Pico

Summary

Sometimes when you repair some electronics hardware and do some Research and Development work, you need an Oscilloscope. You can use multimeters as well, but the problem with multimeters is that they aren’t fast enough to detect the signals. There is a standard oscilloscope for lab and industrial applications.

When you go through the pricing of a commercial oscilloscope, you will realize it is not affordable for beginners. If you are an electronics hobbyist or some technician and if you are unable to buy these, then here is a solution for you. We can design a simple DIY SmartPhone Oscilloscope using a microcontroller at a very low price probably at 5$ only.

Read further from https://how2electronics.com/diy-smartphone-oscilloscope-using-raspberry-pi-pico/

This model uses the rotary switch circuit to shift between voltage dividers to make it feasible for the pico to measure safely. Circuit diagram- https://how2electronics.com/wp-content/uploads/2022/02/DIY-SmartPhone-Oscilloscope-1-580x439.jpg

The rotary switch is taken from an old ceiling fan speed regulator. This has 5 steps. The resistors i have used in series are 100k,100k,10k,1k.

You may need to give support for printing the top cover.

Please use aligator clips to connect the testing device.