手机支架

Phone Stand

2023-05-11 10:41:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Thank you for your interest in my model. Please read the following notes for the best print quality and greatest experience.

I haven't printed this just yet but will do ASAP. I recommend the normal one because it is a easier thing to print and doesn't need supports. #2 does use less filament but will take a lot longer.

Please give me feedback after printing it, as this is my 1st design. NOTE: New versions will come as problems occur. I recommend printing the newest design as it works the best.

Currently the model is made to fit the latest model.
I will be figuring out the scale for each iPhone soon. PLEASE NOTE: iPhone max's and mini's I will not put the scale the require.
Phones | Scale
14 | 100%
13 |
12 |
11 |
10 |
SE 3rd |
SE 2nd |
SE 1st |

For certain requests of a different phone you may comment and I will get to it ASAP

Happy Printing!