Multimeter probe, High voltage probe

2023-03-26 13:52:35

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

这是一个3D打印的高压电表探头。我制作它是为了做一个高压探头，放大100倍。

If I read 1volt it means 100v

I used 2x 100Meg Ohm 1% in series with a 2.4Meg 5% and I added a 33k to have exactly 2.4746Mohm

100M 8000 volts digikey PN: HVA12FA100MCT-ND
n2.4M,33k regular 1/4watt is fine

Metal tip from ebay see photo. Just search for multimeter probe needle

100% infill, No support needed except for the tip.

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

邮箱: 289047960@qq.com