Gnome Sigma 旋转发动机

Gnome Sigma Rotary Engine

2023-05-11 20:00:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These files are for a 1:6 scale Gnome Sigma rotary engine as used in the 1912 Blackburn Monoplane and other early aircraft. There are only three parts to the model - cylinders front, cylinders rear and a joining ring that sits between the two engine halves and keeps them aligned while they are glued together.

The model in the photograph was printed on an FLSun V400 with supports enabled with a support overhang of 70 degrees.

Push rods are simply short lengths of piano wire epoxied in place.

There are tiny supports as part of the print behind the lower tappets. These can be removed after printing.

Finished model, including pushrods, weighs 45 grams.

I have not provided any means to fix the engine into a model as the crankcase has been designed to be a fairly tight fit over a Surpass 4260-06 motor and will be fixed to that.