C13 标记持有者
C13 marker holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Marker holder for the C13 Deskboard Kickstarter
Mount on any side and should fit most markers you can find (tested with a Sharpie Chalk Marker)
Print Settings
- Printer brand:
AnkerMake
- Printer:
AnkerMake M5
- Rafts:No
- Supports:Yes
- Infill:5%
- Filament brand:
eSun
- Filament color:
Black
- Filament material:
PLA+
- Notes:
Minimal support used on the top tab. I've not tried it without support but you may be able to get away with it depending on your settings.
Post-Printing
You may need to slightly sand the inside surface of the "clips" - especially the bottom side - for a better fit and to prevent it from damaging the deskboard backing.
In my version I only had to sand off some debris left from removing supports and it was a comfortable and secure fit.
Tags
License
C13 marker holder
by spoollooper is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
护目镜夹持架2024-02-05 -
密尔沃基 PackOut 深度组织盒 - 全高设计 - 无分隔板2024-03-18 -
基茨雷廷胡特纳山非营利组织钥匙扣配以卡通币设计2024-03-24 -
Passat B8手机支架2024-03-27 -
Apple Vision Pro磁吸充电盒3D模型2024-04-18
最热下载
-
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
HGX lite v2支架2025-07-18
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
一体打印活动关节熊猫和支架2025-07-25 -
弹弓HGX-FRAME V1A2025-07-18 -
性感美女3d人像（带基座）2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16