手机简单支架

Simple Phone Tripod

2023-05-27 10:29:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This simple Tripod is composed of 3 3D printed parts, 1 3/4 PVC Tube and a base to screw on. The goal of this simple print is to hold your phone for simple recordings using minimal parts and assembly.

The phone holder works with rubber bands tensioning both parts together. I decided on using this method for simplicity and print time. I work on this for just a few minutes in Rhino 7 and needed it fast so i could mess with printed screws.

The parts can be printed under 3 hours and will work with different phones, i recommend using the "short" version of the files. These have better geometry and are easier to use.