Gridfinity托盘（适用于Iwiss SN-2549 JST钉接工具，尺寸5x2）

Gridfinity tray for Iwiss SN-2549 JST crimp tool (5x2)

2023-05-27 10:31:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Gridfinity托盘（适用于Iwiss SN-2549 JST钉接工具，尺寸5x2）

Gridfinity托盘（适用于Iwiss SN-2549 JST钉接工具，尺寸5x2）

Summary

A 5x2 half-height Gridfinity tray for the Iwiss SN-2549 crimping tool.

Probably also fits:

SN-28B
SN-58B
SN-025
SN-01BM

as these seem to use the same chassis.

The tool sits about 3mm proud of the top of the tray so you can't stack anything else on top of it.

(The SN-2549 is for JST and DuPont connectors and crimps both parts of the contact at once.)

Link to the tool: https://iwiss.com/products/icrimp-sn-2549/
The gridfinity storage box pictured: https://www.printables.com/model/361829-rugged-gridfinity-box

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2mm layer height
Infill:
10% Gyroid
Filament brand:
3DTomorrow
Filament color:
Leaf Green
Filament material:
PLA
Notes:
I suggest using glue as this is a wide flat print and will probably curl otherwise. I had success with magigoo, and the following temperatures:

Bed: 50°C
Extruder: 190°C

How I Designed This

Designed in openscad, by modifying this:

https://github.com/kennetek/gridfinity-rebuilt-openscad

The curved shape was helped by using this, along with some trial and error:

https://github.com/Irev-Dev/Round-Anything

Tags

crimping tool gridfinity JST JST-XH JST Connector tool storage

License

CC BY-NC-SA

Gridfinity tray for Iwiss SN-2549 JST crimp tool (5x2)
by MatthewStephenson is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Gridfinity托盘（适用于Iwiss SN-2549 JST钉接工具，尺寸5x2）

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型