栖息栏支架
Roosting Bar Brackets
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Roosting Bar Brackets, allowing for any size roosting bar.
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X1
- Rafts:No
- Supports:No
- Infill:None, but feel free to add for strength
- Filament brand:
Hatchbox
- Filament material:
PLA
- Notes:
Our roosting bar is on an angle across the henhouse. Note: two sets are required for each bar. Printing a bottom to support the bar, and two sides to "brace" the bar allowed for any positioning. The regular 2x4 opening did not allow for angle positioning. Designed with Fusion 360. Sliced with Cura. Holes are sized for #9X1-1/2" wood screws.
NOTE: Project needs to be rotated to the bed, with the solid side down.
This is my first print, and I am a total noob. Please don't abuse me too much.
Custom Section
License
Roosting Bar Brackets
by CAPJohnA is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
3D木托盘模型2024-05-08 -
泳池盖卷帘3D模型2024-05-06 -
魔杖2024-05-06 -
克勒普顿卷线器2024-05-06 -
雨滴罩密封夹具套装（针对Scirocco MK1）2024-05-06
最热下载
-
FPV 模型：原型坦克配备炮塔2023-03-26 -
花环戒指2024-05-08
