右侧耳罩修复 | SteelSeries Arctis Pro

Right Earcup Fix | Steelseries Arctis Pro

2023-03-26 15:30:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

REQUIRES SOLDERING

This is a temporary fix I designed for my Arctis Pros as Steelseries refused to sell me spare parts or offer a repair service (I told them I was happy to pay!!). Their slimy policy on repairs meant that I gave this a go.
nThis is a fix for the right earcup which had broken where the headband stem (for lack of the proper term) attaches into the earcup. This seems a very common fault with Steelseries headsets.
nUsing this fix means you will have to desolder the speakers from the little PCB board that is inside the cup. Unfortunately unless you are a careful you may lose your RGB lighting in the earcup. You would need to cut out and stick on some light-diffusing plastic to get a nice colour effect anyway. This wasn't a concern for me as it was too far broken already hah.
nSteps:
n1) Open up your broken earcup.
n2) Unscrew PCB border.
n3) Make note of which wire (green or copper iirc goes to +ve and -ve)
n4) Desolder the wires in a manner which leaves the PCB still connected to the wires which run through the headset stem into the rest of the headset
n5) Remove the circlip, if not done already, from the headband stem.
n6) There is a rectangular hole on the printed part through which you should careful pass the PCB board(s) through so that they are inside the printed part.
n7) Insert stem into your 3d printed fix and reattach circlip
n8) now you can resolder the speaker to the PCB board
n9) The speaker screw into the printed part using the same mounts as the original piece.

I drew a picture that may help make sense of these instructions. Or may not.

I hope these instructions suffice, I'm doing this off of memory as I have since totally snapped my headphones at the beach and binned them.... my fault... dont take headphones to the beach...

Please feel free to remix! I'm sure someone better than me at CAD could simplify the installation steps of this. It's been so long that looking at my design history for them scares me lol.
nI hope these help somebody - we should always be able to fix our things.

右侧耳罩修复 | SteelSeries Arctis Pro

朋友，你觉得上面这个模型，属于下面的哪个分类？