水表近距离传感器支架（V200 / TL-W4MC1）

watermeter proximity sensor holder for V200 / TL-W4MC1

2023-06-21 04:35:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The horizontal position of the sensor in the holder in the original design turned out to be fine.

Reasons to remix / adapt:

To improve the sensitivity of the proximity sensor TL-W5MC1 I have removed nearly the complete plastic cover of the sensor. To position this adapted sensor directly on the V200 watermeter surface a small part of the holder has been removed in the design.
For the same reason the cable groove has been enlarged
To be able to read the complete output of the watermeter after placement of the holder a rectangular part has been taken out of the original design. This is especially important in the test phase.

One of the images shows the reflection of the red LED when the sensor detects the special spot on the "liter wheel" of the V200 water meter (in a dark environment). When water is tapped this reflection should be on and off in a nice duty cycle per liter water.