Sovol SV07 导线传感器支架（用于打印头部件）

Sovol SV07 Filament Sensor Holder for Printhead

2024-05-03 00:37:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello There,

So I am printing on a private and I encountered several times that my filament would "run out" on a longer print on like the last layers.
So what I did was move the filament sensor directly to the printhead with this sensor holder.

I included 3 files for you guys:

Sensor_Clamp.stl
For your standard Sovol SV07 (Plus has the same printhead I believe) with enough room for pulling the unloading lever.
For mounting the clamp to the printhead use the slightly longer screws from the original mount bracket on the spoolholder, clamp the sensor itself to the holder with the tapped backplate from the original mount.

Sensor_Clamp_NoShroud
For you shroud-deleters out there I compensated the thinkness at the screwhole.
Comes with a drawback though, you either have to use longer screws that you cannot recycle from original parts, or you have to print the holder with supports on the whole sensor mount area.

Of course you also have to pull out the sensor cable out of the left y-axis frame, I am working on a spline solution for guiding that cable away from obstacles.

Have fun!