硫化机模型

VULCANIZER

2024-04-13 19:54:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Model Name: Vulcanizer

Description:
The "Vulcanizer H.G." is a meticulously designed 3D model that represents a steampunk-inspired hand cannon. Drawing on the industrial vibes of the 19th-century steam-powered machinery, this model showcases an elaborate mix of rugged metal textures and leather wrappings, punctuated with brass accents that give it a distinct retro-futuristic look.
Painting Tips:
For painting the "Vulcanizer H.G." model, here's a step-by-step guide to achieve a realistic steampunk finish:

Cleaning: Begin by cleaning any support material from the print and sanding down any rough edges to ensure a smooth surface.

Priming: Apply a primer to help the paint adhere better. A gray primer can help you identify any imperfections that need more sanding.

Base Coat: Use a dark brown or black base coat to establish the deep shadows and add depth to the overall look.

Metallic Layers: Apply metallic paints such as copper, bronze, and silver to different parts, using a dry brush technique for a worn metal effect.

Details: Accentuate the details with a fine brush, such as gears, dials, and rivets, to make them stand out.

Aging: Add aging effects with a mix of black or brown washes. Dab and wipe away excess to leave the wash in the crevices.

Weathering: For a weathered look, lightly sponge on a rust color in areas that would naturally corrode over time.

Highlights: Use a lighter color to dry brush edges and raised areas to create highlights, enhancing the 3D effect.

Sealing: Once the paint is dry, seal the model with a clear coat to protect the paint job.

Final Touches: If desired, add touches like a leather wrap made from painted tissue paper or small brass pieces for additional texture and detail.

By following these painting tips, you will bring out the intricate details of the Vulcanizer H.G., resulting in a prop that looks like it came straight out of a steampunk universe. Always take your time with each step to ensure the best possible result.

Print Settings

Notes:
Material: PLA is commonly used for detailed models like this due to its ease of printing and post-processing. Layer Height: 0.20mm for a balance between detail and print speed. Infill: 15% to ensure the model is sturdy enough without using too much material. Bed Adhesion: A brim or raft might be necessary for the parts with smaller footprints to prevent warping and to ensure better adhesion to the build plate. Print Speed: A moderate speed is advised to capture the fine details without introducing errors. Nozzle Temperature: Typically around 200°C for PLA, but this might vary slightly based on the specific filament brand. Bed Temperature: Approximately 60°C to ensure the first layers stick well. Orientation: Each part should be oriented to minimize overhangs and to place the largest flat side down on the build plate. Assembly: Post-printing, the parts can be assembled using superglue or epoxy. If desired, the model can then be sanded, primed, and painted to enhance the visual details and achieve a metallic finish. Remember, these settings are a starting point and may require tweaking based on the specific printer, filament, and environmental conditions. Always refer to the printer manufacturer's recommendations and the filament's specifications for optimal results.

硫化机模型

朋友，你觉得上面这个模型，属于下面的哪个分类？