LG魔法遥控器AirTag固定点

LG Magic Remote AirTag Mount

2023-06-21 07:06:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

An AirTag holder contoured to fit the back of an LG Magic remote control.

It should print best in the given orientation--standing on one of the long sides.

The icon in the base should be oriented so that it points toward the narrow end / top of the remote. It should fit well(-ish) just inboard of the trash disposal icon.

I recommend installing an AirTag in the mount before gluing the mount to the remote.

You could glue it with epoxy, or super glue, or probably Super 77. I used Super Glue and it stays very well.

I used a small clamp to hold the mount on while the glue dried. I recommend dry-clamping it first to inspect the placement, as it can easily be pushed to the side. You could probably also use rubber or elastic bands as clamps.

The holder will hold an AirTag in either orientation. When the remote is laying flat, it will rest on whichever side of the AirTag is facing out.

Print Settings

Printer brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
No
Supports:
No
Resolution:
.1mm
Infill:
20
Filament brand:
Generic
Filament color:
Black
Filament material:
PLA
Notes:
Printing .1mm levels gives the least sag and best definition to the features. 20% infill is probably not necessary, but makes the piece way 5g