网眼透风拖凉鞋赤足鞋凉鞋

Tora barefoot shoes

2025-07-18 20:35:42

凉鞋,barefoot shoes

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

尺码：EU

耗材:
首先使用 TPU 95A（Overture），不要使用 "高速"、"高流量"（太硬，不舒服）。最好：Recreus 82A、3Dfils 85A。
视频: https://www.youtube.com/watch?v=y2OOk_2cu5w

3D 打印设置

Bambu Studio / Orca 切片设置:

Global
层高: 0.2mm
line width sparse infill: 0.6mm

wall loops: 0
top shell layers: 0
bottom shell layers: 0
sparse infill density: 62%
Infill pattern: Grid
Infill anchor: 1000 (unlimited)
Max infill anchor: 1000 (unlimited)
Infill direction: 45°
Detect narrow internal solid infill: no
Speed sparse infill: 18 mm/s
Enable support: no
Reduce infill retraction: no

Cube modifier (256x256x0.9mm around height 1.5mm to make a 3 layers platform):

Infill density: 60%
Infill pattern: Rectilinear
Infill direction: 0°

Filament:

Retraction: 1.8mm
Wipe: no
Z hop: 1.2mm, Normal type
Max volumetric speed: 4.8 mm^3/s

Cura settings:

place the model diagonally (45°)
layer height: 0.3mm
infill line width: 0.65 (or 0.4 with 162% infill flow)
wall line count: 0
top layers: 0
bottom layers: 0
initial bottom layers: 0
infill line distance: 2mm
infill pattern: grid
connect infill lines: yes
infill line direction: []
randomize infill start: yes
infill overlap: 0mm
infill speed: 18mm/s
combing mode: off
z hop: 1.2mm

settings modifier (300x300x1.1mm solid, placed around Z = 1.4mm, to make an internal flat top 3 layers platform to place the feet)

infill pattern: zigzag
infill line distance: 1mm
infill line direction: [0,90]

如何设计和切片: https://www.youtube.com/watch?v=6ae-rzo_zJM

网眼透风拖凉鞋赤足鞋凉鞋

朋友，你觉得上面这个模型，属于下面的哪个分类？