衣物架扩展装置

Clothes/Coat Hanger Extender

2024-01-14 14:18:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of "Closet Hanger Extension / Kleiderbügel Erweiterung" by mrcsmxms, found here: https://www.thingiverse.com/thing:4981580

I changed the shape a little bit using TinkerCAD to allow for plastic clothes hangers to be used. They're slightly thicker than the metal ones, so the hook needed to be widened.

Prints on a Creality Ender 3 V3 SE in 20 minutes or less, depending on choice of infill %. Very simple to slice and print.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%*
Filament brand:
SAKATA
Filament color:
Fluorescent Orange
Filament material:
PLA
Notes:
*: I printed this with "Lines" infill at 7.5%, and the infill strands were so thin as it was printing it looked like it was a test piece for stringing. However, it is still able to hold up as much weight as the plastic hanger above it is willing to allow. So, it's up to you depending on your application how much infill you need, but 10% should be more than strong enough for clothes. If you're the kind to try and save filament, you could probably get away with having it hollow with no infill at all.

TL;DR: 10% infill should be strong enough for clothes