3dsjs

‘Dirkie Uys’ 牛车模型

‘Dirkie Uys’ Ox Wagon

2023-06-21 23:19:49

使用说明

  1. 所有模型资源均由用户上传分享，内容来源于网络公开资源
  2. 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
  3. 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问
抖音私信 @jobsfan
‘Dirkie Uys’ 牛车模型
‘Dirkie Uys’ 牛车模型

Summary

The Voortrekkers used ox-wagons (Afrikaans: Ossewa) during the Great Trek north and north-east from the Cape Colony in the 1830s and 1840s. An ox-wagon traditionally made with the sides rising toward the rear of the wagon to resemble the lower jaw-bone of an animal is also known as a kakebeenwa (jaw-bone wagon).

History

I am 71 years young and decided to build a Delta 3D printer to show the youngsters that there is nothing wrong with my mind and head. It took me 1 year and 3 months to complete it. All the parts are metal and handmade. The size of my printer is 300mm radius and 1000mm high.

I am in South Afrika and interested in our Afrikaner history. I looked around but couldn't find anything for South African voortrekker ox wagon to print, so I just had to do this myself. The ‘Dirkie Uys’ Wagon is believed to be over 180 years old. I used SCAD to draw all the parts and with "chassis_v2.scad" you can assemble the wagon.

Here is my contribution to thingiverse. I have included the SCAD files. I am not a programmer and my SCAD code is sloppy. You are more than welcome to clean the code and send me a copy please. You will find my address somewhere in the “BOX_V3B.SCAN” code

SCAD code notes:

  1. “watent_v3C.scad”
    You use this to print the tent sideways with the ribs
    If it is too big for your printer you can cut it onto two parts. see lines 129 and 131 in the unmodified copy.
  2. “watent_v3B.scad”
    Print the tent or frame. see comments at the end.
  3. frame_v3B.scad
    Use to print the frame ribs only. You can select the rib number.
  4. Variables
    I have moved all the variables of the modules to “OssewaConfig_V2.scad”
  5. Modules
    All the modules are moved to “OssewaLibrary2.scad”
  6. Language
    All the notes, remarks and names were in Afrikaans/Dutch in version 2 of the code. English is added to version 3.
  7. The Assembly
    “chassis_v2.scad” Is the assembled wagon. Modules may be excluded to remove certain parts.
  8. Other support
    I have not included all the robes, chains and iron connecting rods.

Printer

Printer DIY Delta 3D printer I used the Ardunio mega with Repetier

Printing

Filament: PLA glow in the night Green
Rafts: Not necessary on most of the parts.
Supports: Not necessary on most of the parts. It depends on the orientation on the print bed.

License

CC BY

‘Dirkie Uys’ Ox Wagon
by OckertJVN is licensed under the Creative Commons - Attribution license.

‘Dirkie Uys’ 牛车模型
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15

联系我们

邮箱: 289047960@qq.com

热门推荐

  1. ST150轮子螺母更换
    ST150轮子螺母更换
    2023-05-01
  2. 3D数据可视化模型
    3D数据可视化模型
    2023-05-13
  3. 刀剑守卫：Zenitsu
    刀剑守卫：Zenitsu
    2023-05-13
  4. Heroscape桥墙
    Heroscape桥墙
    2024-01-10
  5. 雷诺·达奇亚车门扬声器雨盔
    雷诺·达奇亚车门扬声器雨盔
    2024-04-04

最热下载

  1. 全能3D打印机测试
    全能3D打印机测试
    2023-03-26
  2. 通用型1/10比例底盘 - DKS基础款
    通用型1/10比例底盘 - DKS基础款
    2023-03-26
  3. GMX曲线支架支持GoPro安装（或轻型结构）
    GMX曲线支架支持GoPro安装（或轻型结构）
    2023-05-22
  4. E3D火山喷嘴
    E3D火山喷嘴
    2023-05-26
  5. 安益卡通 i3 迷你 HGX 轻量挤出器
    安益卡通 i3 迷你 HGX 轻量挤出器
    2024-04-21

最新模型

  1. Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪
    Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪
    2025-08-21
  2. HGX lite v2支架
    HGX lite v2支架
    2025-07-18
  3. 用于加长杆的戴森配件支架
    用于加长杆的戴森配件支架
    2025-07-17
  4. 丰满跪姿美熟女
    丰满跪姿美熟女
    2025-07-16
  5. 大码动漫女战士
    大码动漫女战士
    2025-07-15