Lelit 伊丽莎白蒸汽阀盖

Lelit Elizabeth Steam Knob Cover

2023-06-21 23:35:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a knob cover designed to make your Lelit Elizabeth steam knob more substantial.
The design is inspired by the Lelit Bianca knob.
The cover is inserted from the back of the original knob and secured with a threaded cap to prevent detachment.

Installation instructions:

Print the knob and cap. 0.16 layer height or lower is recommended for smooth curvature at the front of the knob.
Remove the original knob by carefully pulling it from the machine (you may need to wiggle it slightly), insert the knob cover from the back, and secure it with the threaded cap.
Reattach the knob to the machine.
Important: Ensure that you align the flat part of the shaft with the corresponding flat part of the hole on the knob (see picture).
Enjoy using the new knob.
You can download the Fusion360 and step file with the original knob model inside to remix or create your own knob if desired.

I printed it with PETG, and I've been using it for a week now, so far so good, no warping or loose problem.

Happy steaming.

PS. Yeah I know that bright red color was not an elegant choice, I don't have other PETG color at the moment. Planning to print it in black soon.