贝斯弦快速缠绕器

Bass String Winder

2023-06-22 12:49:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I looked a couple designs for string winders, but didn't see any I particularly liked. So I designed my own.

It's 3 pieces, has relatively close-fitting tolerances with lots of facets on the round parts, so it feels nice to use, and glues together with a drop of CA glue.

Put a tiny drop of glue in the pin socket from the back after you've partially inserted the pin, then push it the rest of the way.

Be careful to:
a) to not glue the knob to the pin,
b) to not seat the pin too tightly that the knob doesn't turn (the shoulder on the pin should prevent this, but it might be possible if there are printing anomalies),
c) make sure the pin is inserted facing away from the tuner pocket.