三脚架快速鞋垫
Tripod Quick Shoe Cushion
2024-05-02 04:12:24
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I had an old Vanguard Tripod I needed to use for digitising some old slides but found the Quick Shoe cushion had perished and basically crumbled when I touched it. Since the rest of the quick shoe was in good order I thought I would print a replacement cushion.
The tripod model is a T-120223AB and the quick shoe is a QS-03 and fits various other vanguard tripods.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO NEPTUNE 4
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.2mm
- Infill:Tri-Hexagon 15%
- Filament brand:
Geetech
- Filament color:
Any
- Filament material:
TPU 95A
- Notes:
I used Elegoo's version 5.6 Cura to do the slicing using the generic TPU 95A profile.
Post-Printing
The hole for the 1/4inch screw is deliberately tight to hold the screw.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Raspberry Pi外壳2023-03-27 -
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
老板螃蟹 KGC-0102023-09-08 -
Arduino继电器模块外壳2024-01-14
最热下载
-
MK47 模组道具枪2023-03-26 -
佳能EOS镜头连接接口2024-01-11 -
硫化机模型2024-04-13 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
鞋撑2025-07-17 -
兔女郎半身像2025-07-15