飞鱼零无线网络开发板基础版外壳

Flipper Zero - Wi-Fi Dev Board Case (Basic)

2023-06-22 13:40:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

飞鱼零无线网络开发板基础版外壳

飞鱼零无线网络开发板基础版外壳

Summary

This print is specifically designed for the basic WiFi board straight out of the box, omitting features such as the antenna and SD card slot.

This creation is a remix of magdong's Wi-Fi Dev Board Case (https://www.thingiverse.com/thing:5564906).

For secure assembly, utilize 4 x M3x12mm screws accompanied by 4 x M3 nuts.

This design also has a pin protector boot cover that can be found in the following locations:

https://www.thingiverse.com/thing:6104552
https://www.printables.com/model/606861
https://github.com/CodyTolene/3D-Printing/tree/main/Flipper%20Zero%20-%20WiFi%20Dev%20Board%20Case%20Boot%20Cover
My print settings:
Hatchbox PLA
0.2mm layer height
0.4mm nozzle (line width)
Enable retraction
Wall count 3 (+ print thin walls enabled)
Top/bottom layers: 4
Infill density: 20%
Infill pattern: Cubic
Print temp 200 C
Bed temp 60 C
No supports needed

See more designs on my GitHub here: https://github.com/CodyTolene/3D-Printing

Tags

flipper flippers flipper zero Flipper Zero Case hat Wifi

License

CC BY-NC

Flipper Zero - Wi-Fi Dev Board Case (Basic)
by CodyTolene is licensed under the Creative Commons - Attribution - Non-Commercial license.

飞鱼零无线网络开发板基础版外壳

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型