16mm窄轨磁力耦合

16mm Narrow Gauge magnetic coupling

2023-06-22 16:38:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple 2 piece design of buffer and coupling base. Simply add a 6mm magnet into the hole, and secure with a dab of super glue.

The single magnet couplings are "handed", so you will need to make one North and one South, and each wagon or coach will only be able to couple up the right way round. A dual version using 2 x 3mm magnets is included if your stock gets rotated in use.

To secure the 2 parts together, use a small screw. Leave some slack, so that the coupling can move from side to side and up and down, as this will reduce the chances of the coupling lifting a lighter wagon if the height is not identical.

Can easily be printed in PLA on a standard printer without supports. Use 0.12mm layer height to get best finish.