太阳池泵喷水头部（1厘米接头）
Fountain head for solar pond pump with 1cm fitting
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Fountain head for solar pond pump with 1cm diameter pipe/fitting.
The stock supplied heads where kind of boring and in black plastic which blocked the LEDs that where supplied with my pump.
This design spreads the water in an interesting pattern and lets the LEDs light up the water streams much better than when using the stock ones.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:Yes
- Supports:No
- Filament brand:
Overture
- Filament color:
Transparent
- Filament material:
PETG
- Notes:
Print slowly due to tiny holes of 1.5mm and 2mm diameter
You will likely need to clean the holes/channels using a 1.5mm drill bit for the top most channel. And a 2mm drill bit for the 8 lower channels.The spread of the 8 lower streams can be narrowed in a bit by drilling the top channel wider than 1.5mm.
Tags
License
Fountain head for solar pond pump with 1cm fitting
by mosushi is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
武士头巾 - 男妆2023-03-26 -
黑武士2游戏手柄改装及配件分离2023-08-23 -
生日蛋糕2024-04-07 -
CHIMERA/RHINO 3D模型代理模块APC（FDM友好，一层打印完成）2024-04-07 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
拒绝的手势2024-04-19 -
厨房水槽滤网过滤器2025-06-05 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
罗技K400键盘壁挂式支架2025-07-27 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
弹弓HGX-FRAME V1A2025-07-18 -
巴黎卢浮宫的三圣母像2025-07-16