摩托车飞翼式屏幕支架
Motorcycle Aerofoil Screen Bracket
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
designed to work with "Motorcycle Air Foil Bracket for Moto Guzzi V85TT and others" by ScottTheFalcon.
I designed it around a M3 x 25 screw and recessed nut for holding my design to ScottTheFalcon's, and recessing 2 M5 nuts and your choice of screw to hold it to your existing screen. depending on the material you chose and your printer, you may need to open the holes a little. I advise at least 1.6mm (4x nozzle diameter) wall thickness and high infil percentage.
I enabled support where touching build plate, but you may not need this.
Print Settings
- Printer brand:
UltiMaker
- Printer:
Ultimaker 3
- Rafts:No
- Supports:Yes
- Resolution:fine (0.1mm)
- Infill:80%
- Filament brand:
Ultimaker
- Filament color:
Black
- Filament material:
Nylon
Custom Section
License
Motorcycle Aerofoil Screen Bracket
by CraigECUTC is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
轻量级螺旋桨2024-05-08 -
第一人称标记：戈宾诺的冒险2024-05-08 -
Taco Bell 国际象棋棋盘：国王棋子2024-05-08 -
rugged 多米诺骨盒2024-05-06 -
福特OBS后部车厢地板插头2024-05-06
最热下载
-
沃帕尔六足行走机器人2023-03-26 -
FPV 模型：原型坦克配备炮塔2023-03-26 -
FFBeast仿真飞行器模拟轮部件2024-04-19 -
幻想磁力2024-05-03 -
线框无心2024-05-08