盐湖插入整理器

Salton Sea Insert/Organizer

2024-04-13 04:06:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

An insert for the board game Salton Sea.
The insert fits all sleeved cards and all 5 language rulebooks.

Part of the design is have the rulebooks on top to prevent any shifting, so if you're not keeping all of them the box might actually be too loose and parts could get mixed if the game is tilted.

You'll need to print:
4x SaltonSea_PlayerPieces.stl
3x SaltonSea_CardsHolder.stl
1x SaltonSea_TilesHolder.stl

I sleeved with sleeve kings sleeves, which are 60microns, and I managed to fit all cards, while still maintaining some level of thought as to where the cards go:
1$ actions + research ==> 70 cards
3$ actions + 5$ actions ==> 72 cards
claim + objective + contract + solo ==> 72 cards

As you can see from the pictures, the way to fit everything in is to:

Put all player boards at the bottom
Place the card holders on their sides along the edge of the box
Place the player pieces boxes and tiles holder
Game board goes on the player pieces boxes
Instructions and player aids goes on that

As with all of the inserts I print, I use 0.28 layer height, no top/bottom and a 20% grid infill.
This saves a bit on material (and weight), and I don't really need the parts to be rigid/strong, as they're not under stress.