可堆叠项目整理器（螺丝及零件托盘）

Stackable Project Organizer (screw and parts tray)

2024-05-05 03:44:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

可堆叠项目整理器（螺丝及零件托盘）

可堆叠项目整理器（螺丝及零件托盘）

Summary

I made this stackable tray to address three problems I had:

With other tray designs, if you hold a stack of them in one hand, they fall apart. While it may look scary to hold them like in the photo, they are completely stable and won't separate! This is because of the feet.

To fit objects of various sizes, not just screws and small items. Batteries, buttons, joystick assemblies etc. are pretty big!

Stacking and unstacking them is easy and you don't have to be precise. They just fall into place.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm layer, 0.4mm nozzle
Infill:
30%
Filament brand:
Generic
Filament color:
Neon Green
Filament material:
PETG
Notes:
The settings don't matter. This is a very forgiving print. I chose PETG because it's more flexible but PLA works fine, too.
The only thing you have to be careful of is to avoid warping in the corners. The feet need to be flat for the "hold a stack in one hand" feature to work.

How I Designed This

License

CC BY-NC-SA

Stackable Project Organizer (screw and parts tray)
byelfakynis licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.

可堆叠项目整理器（螺丝及零件托盘）

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

月相12阶段，可嵌入式盒子V1.0模型
2023-03-26
Rc帆船双桅船模型 Wave 58 'Sta Ana'
2023-04-01
丰田Corolla AE86座椅倾斜手柄
2023-05-12
Mobula 6盒3D模型
2024-01-17
Gue'Ron'Vesa MK 2 by El Mutanto
2024-04-03

最热下载

最新模型