Voxelab Aquila - 非侵入式线性轨道 Y 轴

Voxelab Aquila - NILR (Non Invasive Linear Rail) Y-axis

2023-08-24 19:06:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Convert the Y-axis of your Voxelab Aquila into Linear Rail. Non Invasive so you can go back to wheels at any given time.

It was inspired by: https://www.thingiverse.com/thing:4553090 which I use on my Artillery Sidewinder X2 and I'm satisfied of it

/!\ Made quickly enough on Tinkercad, so while it work, it really, really need some improvement and testing /!\

Obviously, printing with ABS (and support), for at least everything under the bed and also for the part close to the motor as the default motor of the Aquila get really, really hot.

The screw hole of the plate should be tight enough that you can use the default screw

Requirements:

2x linear guides MGN12H with carriage (333mm each)
8x M3 8mm (carriage mount).
26x T Nut + 26x M3 screw (linear rail on the profile).
The rest use the original screw.

Installation:

Dismount the bed and both end of the Y-axis.
Put the two linear rail in place, do NOT tight them right away as you want them to be parallel.
Fix the carriage and the plate and slowly move the assembly bit by bit, tightening little by little the linear rail to the profile, do a bunch of back and forth as you tight them more and more.
Once done, you can fix the rest again. Do note that the part where the end-stop button is isn't done well but it will work. Feel free to improve it.